Vol. 11 No. 1 (2026): Dossiê 1º INOVAMAT

Published: 2026-04-15

Editorial

  • The 1st International Congress on Innovation in Materials and Manufacturing

    Anderson Daleffe
    1-2
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.507

Congresso Internacional de Inovação em Materiais e Manufatura - INOVAMAT / UNISATC - Criciúma

  • Analysis of a bimetallic joint produced by warm forging of an additive manufactured steel and rolled aluminum

    Joélson Vieira da Silva, Lirio Schaeffer, Anderson Daleffe, Henrique Cechinel Casagrande, Gilson de March, Jamile Thön Langbehn, Vânia Medeiros Ribeiro
    3-16
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.498

  • Analysis of surface wear of W-Cu contacts in voltage regulator tap changers

    Max Gabriel Steiner, Anderson Diogo Spacek, Anderson Daleffe, Gilson De March
    17-31
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.504

  • Integrated analysis of the use of chills in high-chromium cast iron plate casting: effects on shrinkage, hardness, and microstructure via computational simulation and DoE

    Ricardo Eichelberger Jungblut, Gabriel Borges Cechinel, Rafael Bernaldo, Renan Copetti Menegaro
    32-46
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.505

  • Evaluation of the creep behavior of 10CrMo910 steel via computational simulation using the small punch creep test method

    Israel da Silva Miranda , Guilherme Bampi Righeto, Richard de Medeiros Castro, Luiz Carlos de Cesaro Cavaler , Josiane da Rocha Silvano das Neves , Franco Wronski Comeli
    47-61
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.503

  • Evaluation of the forging of a carbon steel coated with 316L stainless steel alloy by arc thermal spray

    Alexandre Milanez, Jamile Thön Langbehn, Natália Ribeiro dos Santos; Ana Carolina Tassi Junkoscki; Luiz Carlos de Cesaro Cavaler
    62-71
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.497

  • Performance comparison between ASTM A-36 steel with hardfacing and carburizing and SAE 8620 steel

    Jamile Thön Langbehn, Anderson Daleffe, Davi Borges Vieira, Henrique Cechinel Casagrande, Vânia Medeiros Ribeiro, Pedro Henrique Menegaro Possamai, Paulo Eduardo Cecacci de Lion
    72-85
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.499

  • Comparative study of mechanical strength between manual and automated GMAW welding processes

    Alanis Tiscoski, Gilson de March, Anderson Daleffe, João Mota Neto, Henrique Cechinel Casagrande
    86-102
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.502

  • Estudo da viabilidade técnica de coletores solares conformados por estampagem incremental de chapas de alumínio

    Gilson de March, Lírio Schaeffer, Anderson Daleffe, Daniel Fritzen, Henrique Cechinel Casagrande, Max Gabriel Steiner, Joelson Vieira da Silva Silva, Pedro Henrique Menegaro Possamai
    103-119
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.506

  • Influence of load variation on the melt flow rate test for polymers

    Alexandre Milanez, Natália Ribeiro dos Santos, Josiane da Rocha Silvano das Neves, Thiago Fernandes de Aquino, Beatriz Bonetti, Vanessa Olivo Violla, Vanessa de Castro Barbosa, Letícia Possoli dos Santos
    120-134
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.500

  • Investigation of the metallurgical behavior of 310 austenitic stainless steel in the WAAM process

    Henrique Cechinel Casagrande, João Batista Rodrigues Neto, Anderson Daleffe, Gilson de March, Aline Cipriano, Célia de Fraga Malfatti, Pedro Henrique Menegaro Possamai, Paulo Eduardo Ceccacci de Lion
    135-151
    DOI: https://doi.org/10.70185/2525-6025.2025.v10.501